How to Replace Front Brakes 96-99 Buick LeSabre

Difficulty: Intermediate · About 50 min · Buick Lesabre

Renew front brake pads and rotors on a Buick LeSabre, checking slide movement and restoring firm pedal feel before any road test.

Steps

1. Raise the vehicle and inspect

   Loosen the lug nuts on the ground, lift and support the vehicle, then remove the wheel. Check pad thickness and inspect the rotors for grooves or uneven wear.

2. Remove the caliper and rotor

   Remove the caliper fasteners and support the caliper without stressing its hose. Remove the pads and rotor after cleaning rust from the slide hardware.

3. Install new pads and rotor

   Seat the replacement rotor and position the new pads. Retract the caliper piston slowly with a clamp, check that the slides move freely, and reinstall the caliper to vehicle specifications.

4. Reassemble and test

   Reinstall the wheel and tighten the lug nuts to specification in a crossing pattern. Pump the brake pedal until firm and confirm braking at low speed in a safe area.

Check your vehicle’s repair manual for exact specifications and fit.