How to Replace Interior Door Handle 06-12 Nissan Altima
Difficulty: Beginner · About 45 min · Nissan Altima
Replace the interior door handle on a 2006–2012 Nissan Altima by removing the door panel, transferring both cables, and restoring the switch and courtesy lamp connections.
Tools you will need
- Phillips screwdriver
- 10mm socket
- Ratchet
- Trim tool
- Pick tool
Parts and supplies
- Interior door handle
Steps
- Remove the door panel
Pry off the trim behind the handle and remove its Phillips screw. Lift the armrest, remove the panel fasteners, release the clips, and lift the panel away.
- Disconnect wiring and cables
Unplug the courtesy lamp and master switch connectors, then release both interior handle cables from the handle. Set the panel on a protected surface.
- Replace the interior handle
Turn the panel over and remove the three Phillips screws securing the old handle. Position the replacement handle and reinstall the three screws.
- Reconnect and reinstall the panel
Reconnect the two handle cables, switch harnesses, and courtesy lamp. Align the panel with the door, engage its clips, and reinstall the fasteners and trim.
- Check operation
Operate the inside handle and lock to confirm the cables are seated and the latch releases. Test the window switch and courtesy lamp before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.