How to Replace Front Bumper 14-17 Subaru XV Crosstrek
Difficulty: Beginner · About 3 min · Subaru Crosstrek
Remove and reinstall the front bumper cover on a 2014–2017 Subaru XV Crosstrek, protecting painted edges and reconnecting fog lamps before restoring the air guide and clips.
Tools you will need
- Flat Blade Screwdriver
- Painter's Tape
- Trim Tool Set
Steps
Protect edges and remove clips
Apply painter's tape along the fender and headlamp edges. Release the upper push clips, remove the air guide, and free the wheel-well and splash-shield retainers.
Disconnect and remove the cover
Pull each bumper corner outward from its guides and release the remaining clips. Support the cover as it comes forward, then unplug the fog lamps.
Align and reconnect
Reconnect the fog-lamp harness and align the cover with its side guides. Press the cover into its clips evenly without forcing misaligned tabs.
Secure and inspect
Reinstall the wheel-well, splash-shield, and upper clips, followed by the air guide. Remove the protective tape and check panel gaps and lamp operation.
Check your vehicle’s repair manual for exact specifications and fit.