How To Install AC Heater Blower Fan Motor 01-06 Hyundai Elantra
Difficulty: Beginner · About 1 min · Hyundai Elantra
Replace the HVAC blower motor on a 2001–2006 Hyundai Elantra by disconnecting its wiring and drain hose, then testing fan speeds after the motor is secured.
Tools you will need
- Phillips Head Screwdriver
Parts and supplies
- Compatible HVAC blower motor
Steps
Disconnect the blower motor
Turn the ignition off and unplug the blower motor connector. Remove the condensate drain tube and free the wiring bracket from the housing.
Remove the old motor
Remove the motor screws and lower the assembly from the HVAC case. Keep the fan wheel clear of carpet and wiring.
Install the replacement motor
Position the new motor with its connector facing the cabin and secure it with the screws. Reattach the wiring bracket and drain tube.
Test the blower
Reconnect the electrical plug and run the fan through its speeds. Listen for rubbing and confirm the drain tube is not kinked.
Check your vehicle’s repair manual for exact specifications and fit.