How to Replace Fog Light Assembly 04-09 Subaru Outback
Difficulty: Beginner · About 2 min · Subaru Outback
Replace a fog-light assembly on a 2004–2009 Subaru Outback by releasing the lower fender liner, unplugging the lamp, and testing the new light after installation.
Tools you will need
- Flat Blade Screwdriver
- Trim Tool Set
Parts and supplies
- Compatible fog-light assembly
Steps
Access and disconnect the fog light
Switch the lights off and release the lower fender-liner clips. Pull the liner down carefully to reach the lamp connector and unplug it.
Remove the old lamp
Release the housing clips and guide the fog light out through the bumper opening. Inspect the mounting tabs and connector for damage.
Install the replacement lamp
Align the new lamp's locating tabs and press it into the bumper. Secure the housing clips and reconnect the electrical plug.
Restore liner and verify
Return the fender liner to its original position and reinstall its clips. Turn on the fog lights and confirm the beam illuminates and the lamp remains secure.
Check your vehicle’s repair manual for exact specifications and fit.