How to Replace Mirror 93-05 Ford Ranger
Difficulty: Intermediate · About 50 min · Ford Ranger
Replace a side mirror on a 1993–2005 Ford Ranger by disconnecting the battery, removing the door panel and speaker, and reconnecting the mirror wiring before testing.
Tools you will need
- 8mm wrench
- Phillips screwdriver
- 6mm socket and ratchet
- 11mm socket and ratchet
Parts and supplies
- Side mirror
Steps
- Disconnect battery and remove trim
Disconnect the negative battery terminal and isolate it. Remove the door-pull and panel screws, lift the panel off, and disconnect its switches and wiring before setting it aside.
- Remove speaker and mirror
If equipped with a power mirror, peel back the water barrier without tearing it. Remove the speaker fasteners and speaker, unplug the mirror harness, then remove the three 11mm mirror nuts while supporting the mirror.
- Install the replacement mirror
Feed the replacement harness through the door and seat the mirror on its gasket. Start and tighten the three nuts, reconnect the harness, then reinstall the speaker and reseal the water barrier.
- Reassemble and reconnect battery
Hang the door panel on the door and refit its screws and clips. Reconnect the switch harnesses and battery terminal, then test the mirror and window controls.
Check your vehicle’s repair manual for exact specifications and fit.