How to Replace Headlights 93-97 Toyota Corolla
Difficulty: Intermediate · About 30 min · Toyota Corolla
Replace a headlight bulb, or the full headlight and parking light assemblies, on a 1993-1997 Toyota Corolla.
Tools you will need
- Ratchet
- Socket extensions
- Phillips head screwdriver
- 10mm socket
Parts and supplies
- Headlight bulb
- Headlight assembly
- Parking light assembly
Steps
- Swap just the bulb if needed
Reach behind the headlight assembly, twist and pull the old bulb out, unclip it from the harness, then reverse the steps to fit the new one, avoiding touching the glass with bare fingers.
- Remove the grille
Remove its three Phillips screws, then unclip and set the grille aside.
- Remove the parking light
Remove its single Phillips screw, pry the assembly out, then unplug its bulb and harness.
- Remove the headlight assembly
Unbolt its two nuts and one bolt with a socket, extension and ratchet, then unclip its harness.
- Install the new headlight and parking light
Plug the harness into the new headlight, line it up and bolt it in, then plug in the parking light's bulb and harness, clip it into place and refit its screw.
- Reinstall the grille
Clip it back in, refit its three Phillips screws, then close the hood.
Check your vehicle’s repair manual for exact specifications and fit.