How to Replace Hood Release Cable 05-10 Chrysler 300
Difficulty: Advanced · About 150 min · Chrysler 300
Replace the hood release cable on a 2005–2010 Chrysler 300 by removing the front bumper and headlamp for access, routing the cable through the firewall, and verifying latch release.
Tools you will need
- 8mm socket
- 10mm socket
- 13mm socket
- Ratchet and extensions
- Trim tool
- Flat blade screwdriver
Parts and supplies
- Hood release cable
Steps
- Remove the bumper and headlamp
Release the wheel well and belly pan retainers and remove the bumper fasteners. Disconnect side marker and fog lamp wiring, then pull the bumper forward; remove the driver headlamp bolts and unplug its connectors.
- Disconnect the old cable
Remove the hood latch covers and its mounting bolts. Release the cable from the latch and its retainers along the radiator support and fender, then remove the cowl and interior carpet access covers.
- Route the replacement cable
Unfasten the cable from the interior release handle and pull it through the firewall. Feed the replacement through the same opening and follow the original routing path, seating it in each retainer.
- Reconnect the release handle and latch
Secure the cable in the latch and attach the interior release handle. Reinstall the latch fasteners and covers, refit the cowl, and replace the carpet access trim.
- Reinstall exterior components
Reconnect the headlamp wiring and secure the headlamp. Reconnect the bumper lamps, align the bumper tabs with the fenders, and reinstall all bumper and belly pan fasteners.
- Test hood release
Operate the interior release and confirm the hood latch opens and closes correctly. Verify the cable is routed clear of moving parts and the latch fasteners are secure.
Check your vehicle’s repair manual for exact specifications and fit.