How to Replace Mirror 00-07 Ford Taurus
Difficulty: Intermediate · About 40 min · Ford Taurus
Replace the side mirror on 2000–2007 Ford Taurus models by removing the front door panel and reaching the mirror wiring and mounting nuts.
Tools you will need
- Phillips screwdriver
- 6 mm socket and ratchet
- 11 mm socket and ratchet
Parts and supplies
- Compatible side-view mirror
Steps
Remove the door panel
Switch off the ignition and remove the door-panel screws. Release the perimeter clips and lift the panel upward, then disconnect the electrical plugs and set it aside safely.
Access the mirror fasteners
Remove the small trim plug and fasteners at the mirror triangle, then lift off the inner cover. Unplug the mirror harness and support the mirror from outside while removing its mounting nuts.
Install the replacement mirror
Guide the replacement wiring through the door and align the mirror’s upper and lower locating edges. Start the mounting nuts by hand, tighten them evenly, and reconnect the harness.
Refit the door trim
Reinstall the mirror cover and its fasteners. Reconnect the door-panel harnesses, hang the panel in position, press the clips in around its edges, and reinstall the screws.
Verify operation
Test power adjustment and any other equipped mirror functions. Confirm the mirror is firm and that the door panel and triangular trim are seated correctly.
Check your vehicle’s repair manual for exact specifications and fit.