How to Replace Ignition Coil 95-97 Honda Accord
Difficulty: Intermediate · About 60 min · Honda Accord
Replace the ignition coil, including removing the distributor, on a 1995-1997 Honda Accord.
Tools you will need
- Ratchet
- Socket extensions
- 8mm wrench
- 10mm socket
- 12mm wrench
Parts and supplies
- Ignition coil
Steps
- Remove the distributor
Unplug the wire beneath the distributor, remove its two 8mm bolts and pull the cap away, turn the key briefly to spin the rotor facing straight up, remove the 12mm bolt at its side, then pull the distributor out and press its connector's release button to disconnect it.
- Replace the ignition coil
Disconnect the coil's harness, remove its three 10mm bolts, pull it out, set the new coil in with a bolt through it, tighten all three 10mm bolts, then plug the harness back in.
- Reinstall the distributor
Reconnect it, seat it exactly as it came out, refit the 12mm bolt, replace the cap and its 8mm bolts, then reconnect the wire.
Check your vehicle’s repair manual for exact specifications and fit.