How to Replace Front Window Switches 09-14 Ford F-150

Difficulty: Beginner · About 30 min · Ford F-150

Replace the driver or passenger front window switch on a 2009–2014 Ford F-150 by releasing the switch panel and reconnecting its electrical plugs.

Steps

1. Lift the switch panel

   Use a pick to carefully raise the appropriate switch panel from the door. Disconnect its electrical connectors by releasing their locking tabs.

2. Remove the old switch

   Press the switch from below while releasing its retaining tabs with a small flat screwdriver. Lift the switch from the panel without damaging the plastic clips.

3. Install the replacement switch

   Press the replacement switch into the panel until its retaining tabs engage. Confirm the switch sits level and its controls move freely.

4. Reconnect and test

   Reconnect both connectors on the driver panel, or the single connector on the passenger panel. Press the panel back into the door and test the window operation.

Check your vehicle’s repair manual for exact specifications and fit.