How To Replace Rear Wiper Motor 00-07 Volvo V70

Difficulty: Intermediate · About 35 min · Volvo V70

Replace the rear wiper motor on a 2000–2007 Volvo V70 by removing the cargo trim and wiper arm, changing the motor, and testing the washer and wiper.

Steps

1. Remove the cargo trim

   Remove the four T25 screws from the upper and lower cargo panels. Pull the panels away carefully to expose the rear wiper motor and its wiring.

2. Remove the wiper arm

   Remove the arm cover and 13mm retaining nut, then lift the wiper arm from its splined shaft. Mark its parked position if needed to help align the replacement.

3. Disconnect and remove the motor

   Disconnect the washer hose and electrical plug from the motor. Remove its three 10mm mounting bolts and carefully take the motor out of the liftgate.

4. Install the replacement motor

   Position the new motor and install its three bolts securely. Reconnect the electrical harness and washer hose, checking that the hose seats fully.

5. Reassemble and test the rear wiper

   Refit both cargo panels and their four T25 screws. Install the wiper arm in its parked position, tighten its nut, replace the cap, and test the wiper and washer spray.

Check your vehicle’s repair manual for exact specifications and fit.