How to Replace Side View Mirrors 09-12 Toyota RAV4
Difficulty: Intermediate · About 40 min · Toyota Rav4
Replace a side mirror on a 2009–2012 Toyota RAV4 by removing the front door trim, releasing the mirror fasteners, and restoring the switches and clips.
Tools you will need
- 10mm socket and ratchet
- Phillips screwdriver
- Trim panel tool
- Flat blade screwdriver
Parts and supplies
- Side view mirror
Steps
- Remove the front door panel
Release the sail panel, switch bezel, handle trim, and door-pull covers. Remove the Phillips screws, release the panel clips with a trim tool, lift the panel away, and unclip the handle cable.
- Remove the old mirror
Disconnect the mirror electrical plug and support the mirror from outside. Remove its three 10mm bolts, release the retaining tab, and guide the assembly from the door.
- Install the replacement mirror
Transfer the back plate if required and route the harness through the door. Seat the mirror, start its three fasteners by hand, tighten them securely, and reconnect the electrical plug.
- Reassemble and test
Reconnect the door-handle cable and window switch, then align the panel and press its clips in. Reinstall screws and trim pieces and verify that the mirror and window controls operate.
Check your vehicle’s repair manual for exact specifications and fit.