How To Replace Front Power Window Switch 04-09 Subaru Outback
Difficulty: Intermediate · About 40 min · Subaru Outback
Replace the front power window switch on a 2004–2009 Subaru Outback by removing the door panel, exchanging the switch, and reconnecting the latch cables and electrical plug.
Tools you will need
- Phillips screwdriver
- Trim panel tool
- Flat blade screwdriver
Parts and supplies
- Front power window switch
Steps
- Remove the front door panel
Release the sail panel and handle trim, then remove the pull and handle screws. Free the door-panel clips, lift the panel away, and disconnect its wiring and latch cables.
- Remove the old switch
Remove the Phillips screws retaining the window switch. Release its locking tabs with a flat blade tool and lift the switch from its bracket.
- Install the replacement switch
Press the new switch into its bracket until its retainers engage. Reinstall the Phillips screws and make sure the connector and switch are seated correctly.
- Reassemble and test the door
Reconnect the latch cables and door wiring, then hang the panel on the door. Reinstall its screws and trim panels, and test the window switch and door handle.
Check your vehicle’s repair manual for exact specifications and fit.