How to Replace Rear Window Switch 06-11 Toyota Camry
Difficulty: Beginner · About 2 min · Toyota Camry
Replace a rear window switch on a 2006–2011 Toyota Camry by releasing the door panel, unplugging the switch, and checking window operation before restoring trim.
Tools you will need
- Phillips Head Screwdriver
- Trim Tool Set
Parts and supplies
- Compatible rear window switch
Steps
Remove the door panel
Release the handle and pull trim, remove their screws, and free the panel clips. Lift the panel away and disconnect the window-switch plug.
Remove and replace the switch
Release the switch from the panel using a trim tool. Align the replacement with its locating tabs and press it into the panel until it locks.
Reconnect the switch and panel
Reconnect the electrical plug and confirm its lock is secure. Align the panel clips with the door, press them home, and reinstall the handle and pull screws.
Check the window
Test the rear window switch through its full travel. Confirm the panel is secure and the handle and lock operate normally.
Check your vehicle’s repair manual for exact specifications and fit.