How to Replace Headlight 94-97 Honda Accord
Difficulty: Advanced · About 70 min · Honda Accord
Replace a headlight, including removing the front bumper cover, on a 1994-1997 Honda Accord.
Tools you will need
- T40 socket
- Phillips head screwdriver
- 8mm socket
- 10mm socket
- Ratchet
Parts and supplies
- Headlight assembly
Steps
- Remove the front bumper cover
Remove the front grille's five 8mm bolts and depress its tab with a screwdriver to unclip it, set it aside, remove the Phillips screw above the parking light, pull the light aside to reach the bumper's push clips, remove the bolts underneath the wheel well and bumper, unplug the parking lights, pull the bumper cover off starting at the sides, unplug the signal lights, then remove the Styrofoam filler.
- Remove the headlight
Remove the impact absorber's four T40 screws, remove the assembly's four bolts, unplug the bulbs, then unclip the wiring with a screwdriver.
- Install the headlight
Transfer the grille clip to the new assembly, plug the bulbs back in (avoiding touching the glass), clip the wiring back on, tighten the bolts to about 5-10 ft-lb, then refit the impact absorber with the T40 bit.
- Reinstall the bumper cover
Replace the bolts and push clips, then clip and bolt the front grille back in.
Check your vehicle’s repair manual for exact specifications and fit.