How to Replace Power Steering Belt 01-05 Honda Civic
Difficulty: Beginner · About 25 min · Honda Civic
Replace the power steering belt on a Honda Civic by loosening the pump adjuster, routing the belt correctly, and checking tension after startup.
Tools you will need
- 12mm Socket
- 12mm Wrench
- Needle nose pliers
Parts and supplies
- Power steering belt
Steps
Release the belt tension
Loosen the pump mounting and adjuster fasteners. Move the reservoir aside as needed, back off the tensioner, and slip the old belt from the pulleys.
Route the replacement belt
Place the new belt around the crank and power steering pulleys, following the underhood routing diagram. Turn the adjuster until belt deflection matches the vehicle specification.
Tighten and recheck
Tighten the pump mounting bolts and adjuster lock fasteners. Start the engine briefly, shut it off, and recheck belt alignment and tension before driving.
Check your vehicle’s repair manual for exact specifications and fit.