How to Replace Rear Interior Door Handle 00-07 Ford Focus Hatchback
Difficulty: Beginner · About 35 min · Ford Focus
Replace the rear interior door handle on a 2000–2007 Ford Focus hatchback by removing the panel, transferring the latch cable, and securing the handle and trim.
Tools you will need
- T20 Torx driver
- Flat blade screwdriver
- Door panel removal tool
Parts and supplies
- Rear interior door handle
Steps
- Remove the rear door panel
Release the handle and pull trim, then remove the T20 panel screws and pull-handle fasteners. Disconnect the window switch, release the panel clips, and lift the panel away.
- Remove the old handle
Move the lock switch to its locked position, pull the handle from its panel opening, and release the latch cable from its retainer.
- Install the replacement handle
Set the lock switch to the same position, connect the latch cable, and align the handle's locating tabs. Press the handle into the panel until secure.
- Reinstall panel and test latch
Reconnect the window switch and position the panel on the door. Press its clips into place, reinstall the T20 screws and pull-handle fasteners, refit the trim, and test the lock and release.
Check your vehicle’s repair manual for exact specifications and fit.