How to Replace Interior Door Handle 03-05 Dodge Stratus

Difficulty: Beginner · About 30 min · Dodge Stratus

Replace the interior door handle on a Dodge Stratus while reconnecting the lock rod and switch wiring before refitting the door trim.

Steps

1. Remove the door panel

   Pry off the handle and pull-handle trim, remove the panel screws, and release the clips with a trim tool. Lift the panel away, unplug the switches, and disconnect the lock rod.

2. Remove the old handle

   Remove the two handle screws and lift the handle from the door. Release the lock switch from the handle if it will be reused.

3. Install the replacement handle

   Transfer the switch to the new handle, seat the handle in the door, and tighten its screws evenly.

4. Reconnect and test

   Reconnect the lock rod and switch wiring, align the panel with its clips, and refit the screws and trim. Test the latch and lock before closing the door.

Check your vehicle’s repair manual for exact specifications and fit.