How To Remove Front Bumper 99-04 Honda Odyssey
Difficulty: Beginner · About 3 min · Honda Odyssey
Remove and reinstall the front bumper cover on a 1999–2004 Honda Odyssey, unplugging fog lamps as equipped and checking the splash shield and wheel-well fasteners afterward.
Tools you will need
- Flat Blade Screwdriver
- 8mm Socket
- 10mm Socket
- Ratchet
Steps
Release the bumper fasteners
Park on level ground and protect the painted edges. Remove the upper and lower push clips, then remove the fasteners in each wheel well and beneath the bumper.
Disconnect lamps and remove cover
Unplug fog lamps if equipped. Release the cover at both sides and support it across its width while lifting it away from the vehicle.
Align the cover for installation
Clean debris from the mounting points and position the cover at the vehicle. Engage the side guides and install a retainer at each end to hold it while aligning.
Secure and inspect
Reinstall the remaining clips, wheel-well bolts, and lower fasteners. Refit the splash shield, reconnect fog lamps, and check panel gaps and lamp operation.
Check your vehicle’s repair manual for exact specifications and fit.