How to Replace Exterior Door Handle 95-99 GMC Sierra K1500
Difficulty: Advanced · About 75 min · Gmc Sierra K1500
Replace an exterior door handle on a GMC Sierra by supporting the glass and carefully restoring the accessory panel, rods, wiring, and water shield.
Tools you will need
- 7mm Socket
- 10mm Socket
- Phillips Head Screwdriver
- Painter's Tape
- Trim Tool Set
Parts and supplies
- Exterior door handle
Steps
Remove the door trim and accessory panel
Disconnect the window switches and door light, then lift off the interior panel. Peel back the water shield and remove the inner accessory panel fasteners, rods, and wiring connectors.
Secure the glass and release the handle
Raise and tape the window securely. Remove the exterior handle fasteners, free the lock and latch rods from their clips, and withdraw the handle.
Install the replacement handle
Reconnect the lock and latch rods to the replacement, seat the handle in the door, and tighten its fasteners. Remove the glass tape and check that it lowers without catching.
Restore the panels and test
Reconnect the speaker, motor, actuator, and courtesy-light wiring. Refit the accessory panel, reseal the water shield, and install the door panel. Test the handle, lock, and window.
Check your vehicle’s repair manual for exact specifications and fit.