How to Replace Ambient Air Temperature Sensor 09-15 Honda Pilot
Difficulty: Intermediate · About 90 min · Honda Pilot
Replace the ambient-temperature sensor on a 2009–2015 Honda Pilot by removing the front bumper cover, reconnecting the sensor harness, and restoring the bumper clips and shields.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
Parts and supplies
- Ambient air-temperature sensor
Steps
- Release the bumper cover
Remove the radiator-shield clips, grille fasteners, wheel-well screw, and lower bumper retainers. Release both sides of the cover evenly and disconnect any attached wiring before moving it to a protected surface.
- Remove the old temperature sensor
Disconnect the sensor harness and press its retaining tab. Slide the sensor forward off its mount, taking care not to pull or twist the wiring.
- Install the replacement sensor
Slide the new sensor onto its mount until the retaining tab locks, then reconnect the harness. Route the lead along its original path so the bumper cannot pinch it.
- Reinstall the bumper and verify the display
Reconnect any bumper wiring, align the cover with its guides, and press it into its side retainers. Reinstall the lower bolts, wheel-well screw, and radiator-shield clips, then check that the outside-temperature display updates normally.
Check your vehicle’s repair manual for exact specifications and fit.