How to Replace NC Speed Sensor 06-11 Toyota Camry
Difficulty: Intermediate · About 35 min · Toyota Camry
Replace the transmission speed sensor on a Toyota Camry by moving the intake box for access and reconnecting the wiring without pinching it.
Tools you will need
- 12mm Socket
- 10mm Socket
- Ratchet
- Flat Blade Screwdriver
Parts and supplies
- Transmission speed sensor
Steps
Move the air intake for access
Switch the ignition off and remove the air box fasteners. Unplug the intake sensors, loosen the duct clamp, and lift the air box and filter out of the way.
Remove the old sensor
Unplug the transmission sensor connector and remove its retaining bolt. Gently withdraw the sensor, keeping dirt out of the transmission opening.
Install the replacement sensor
Check the sensor seal and seat the replacement squarely in the transmission. Tighten its retaining bolt to specification and reconnect the electrical plug.
Reinstall the intake and verify
Return the air filter and box to their original positions, reconnect the sensors, and tighten the duct clamp. Start the vehicle and scan for codes if a warning remains.
Check your vehicle’s repair manual for exact specifications and fit.