How to Replace Rear Interior Door Handle 14-19 Toyota Tundra

Difficulty: Beginner · About 30 min · Toyota Tundra

Replace the rear interior door handle on a Toyota Tundra by transferring the door cables and securing the panel without pinching wiring.

Steps

1. Remove the door panel

   Pry off the switch and trim covers, disconnect the switch plug, and remove the panel screws. Release the clips, lift the panel away, and disconnect the handle cables.

2. Remove the handle

   Remove the handle fasteners from the back of the panel. Release the handle from its opening without bending the surrounding panel tabs.

3. Install the replacement handle

   Align the replacement handle with the panel opening and engage its retaining tabs. Reinstall and tighten the handle fasteners.

4. Reassemble the door

   Reconnect both door cables, align the panel with the door, and press in the clips. Reinstall the screws and trim, reconnect the switch, then verify handle and lock operation.

Check your vehicle’s repair manual for exact specifications and fit.