How to Replace Windshield Washer Fluid Pump 06-11 Toyota Camry
Difficulty: Intermediate · About 5 min · Toyota Camry
Replace the windshield washer pump on a 2006–2011 Toyota Camry by accessing the washer tank behind the bumper, transferring the hose and connector, and checking spray direction.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
- Trim Tool Set
Parts and supplies
- Compatible windshield washer pump
- Pump grommet, if damaged
Steps
Access the washer reservoir
Protect the bumper edge with tape and remove the necessary splash-shield and liner fasteners. Pull the liner back enough to reach the washer pump without stressing it.
Remove the old pump
Place a catch pan below the reservoir, unplug the pump connector, and disconnect its hose. Release the pump from the tank grommet and inspect the grommet for cracks.
Install the replacement pump
Seat a sound or new grommet in the reservoir, attach the hose to the pump, and press the pump squarely into the grommet. Reconnect the electrical plug and secure the liner.
Refit the bumper and refill
Return the bumper and splash-shield fasteners to their original locations. Fill the reservoir with suitable washer fluid, operate the washers, and check for leaks and correct spray.
Check your vehicle’s repair manual for exact specifications and fit.