How to Replace Brake Kit 99-04 Honda Odyssey

Difficulty: Beginner · About 60 min · Honda Odyssey

Replace the front brake pads and rotors on a 1999–04 Honda Odyssey, cleaning the caliper slides and checking for firm pedal feel before driving.

Steps

1. Remove the wheel

   Loosen the lug nuts while the vehicle is on the ground. Raise and support the front securely, then remove the wheel.

2. Remove the caliper and pads

   Unbolt the caliper and lift it aside without straining the hose. Remove the pads and bracket, keeping the hardware organized for reassembly.

3. Remove the old rotor

   Remove the rotor screws with an impact driver and take off the rotor. If a screw is seized, use an appropriate extraction method without damaging the hub.

4. Install rotor and bracket

   Fit the replacement rotor and its retaining screws. Compress the caliper piston using an old pad and clamp, clean the bracket slides, then reinstall the bracket to specification.

5. Install pads and caliper

   Confirm the slider pins move freely and install the new pads in the bracket. Refit the caliper and tighten its bolts to the vehicle's specification.

6. Reinstall the wheel and test

   Clean the rotor friction surface, mount the wheel, and torque lug nuts to specification in a crossing pattern. Pump the pedal firm and test at low speed.

Check your vehicle’s repair manual for exact specifications and fit.