How to Change Spare Tire 11-18 Volkswagen Jetta

Difficulty: Beginner · About 30 min · Volkswagen Jetta

Change a flat tire on an 2011–2018 Volkswagen Jetta using the vehicle jack and spare, then tighten the wheel fasteners to specification.

Steps

1. Secure the vehicle and retrieve the spare

   Park on firm, level ground away from traffic, set the parking brake, and switch on the hazards. Chock a wheel diagonally opposite the flat, then retrieve the jack, tools, and spare from the trunk.

2. Loosen the lug nuts

   Remove the lug covers with the supplied tool if present. With the wheel still on the ground, loosen the nuts slightly in a crossing pattern without removing them.

3. Raise the car and remove the wheel

   Place the jack at the marked sill point and raise the car until the wheel is clear. Remove the nuts and wheel while keeping clear of the underside of the vehicle.

4. Mount the spare

   Place the spare onto the hub and start the nuts by hand. Snug them in a crossing sequence, lower the car until the tire touches the ground, then tighten to the vehicle specification.

5. Store tools and observe limits

   Lower the vehicle fully and stow the flat and tools. Have the lug torque checked with a torque wrench promptly, and follow the temporary spare’s speed and distance restrictions.

Check your vehicle’s repair manual for exact specifications and fit.