How to Replace License Plate Lenses & Bulbs 11-17 Toyota Camry
Difficulty: Beginner · About 35 min · Toyota Camry
Replace the license plate bulb or lens on a 2011–2017 Toyota Camry by lowering the trunk liner, releasing the lamp assembly, and reconnecting its harness.
Tools you will need
- Trim panel tool
- Flat blade screwdriver
Parts and supplies
- License plate bulb or lens
Steps
- Remove the trunk liner
Release the trunk liner's body clips with a trim tool and lower the felt panel. Disconnect the license plate lamp connector and squeeze the assembly tabs to release the housing from the trunk lid.
- Open the lamp housing
Remove the lens carefully with a flat blade tool and pull the bulb straight from its socket. Inspect the contacts and fit the specified replacement bulb without forcing it.
- Reassemble the license plate lamp
Install the lens and align the lamp housing with its opening. Press the retaining tabs into place, reconnect the electrical plug, and ensure the emergency release remains routed through its opening.
- Refit liner and test
Align the felt trunk liner and reinstall its clips, starting at the center. Switch on the parking lights and verify the license plate lamps illuminate before closing the trunk.
Check your vehicle’s repair manual for exact specifications and fit.