How to Replace Power Side Mirrors 06-11 Honda Civic 4 Door Sedan
Difficulty: Intermediate · About 60 min · Honda Civic
Replace a power side mirror on a 2006–2011 Honda Civic sedan by removing the door panel, unplugging the harness, and resealing the water shield.
Tools you will need
- 10mm socket
- Ratchet and extensions
- Flat blade screwdriver
- Phillips screwdriver
- Trim tool
Parts and supplies
- Power side mirror
Steps
- Remove the door panel
Lift the window switch panel and unplug its connectors. Remove the screw behind it and the inner handle trim and screw, then release the panel clips and lift the panel away.
- Disconnect the mirror
Release the door lock cables and move the water shield access plug aside. Unplug the mirror harness and remove the three 10mm mounting bolts while supporting the mirror outside.
- Install the replacement mirror
Feed the new mirror harness through the opening and position the mirror on the door. Install the three mounting bolts and reconnect the electrical plug, then reseal the water shield access.
- Reinstall the door panel
Reconnect the door latch and lock cables and align the panel on the door. Engage its clips, reinstall the screws and trim, then reconnect and seat the switch panel.
- Test mirror operation
Test mirror adjustment and confirm the switch panel works. Inspect the door panel fit and ensure the water shield is sealed around the access point.
Check your vehicle’s repair manual for exact specifications and fit.