How to Replace Rear Interior Door Handle 06-10 Ford Explorer
Difficulty: Beginner · About 45 min · Ford Explorer
Replace the rear interior door handle on a 2006–2010 Ford Explorer by removing the door panel and transferring the window switch wiring and lock cable.
Tools you will need
- 6mm socket
- 7mm socket
- Ratchet and extensions
- Flat blade screwdriver
- Trim tool
Parts and supplies
- Rear interior door handle
Steps
Remove the rear door panel
Release the side and pull handle trim, then remove the switch, pull, and lower panel fasteners. Lift the switch panel and unplug its connectors before raising the door panel away.
Disconnect the lock cable
Release the door lock cable from the handle using a flat screwdriver. Move the panel to a protected work area.
Replace the interior handle
Remove the three 6mm handle screws and take the old handle from the panel. Position the replacement and reinstall its three screws.
Reconnect and reinstall the panel
Reconnect the lock cable and switch wiring, then hang the panel on the door and engage its clips. Reinstall the 7mm fasteners and refit both trim pieces.
Check handle and switch
Operate the lock and interior handle to confirm the cable is seated and the latch releases. Test the window switch and ensure the panel is secure.
Check your vehicle’s repair manual for exact specifications and fit.