How to Replace Front Door Lock Switch 14-17 Subaru Crosstrek
Difficulty: Beginner · About 60 min · Subaru Crosstrek
Replace the front door-lock switch on a 2014–2017 Subaru Crosstrek by removing the trim panel, releasing the switch from its bezel, and testing the locks before final reassembly.
Tools you will need
- Flat Blade Screwdriver
- Phillips Head Screwdriver
- Trim Tool Set
Parts and supplies
- Front door-lock switch
Steps
- Remove the front door panel
Use a small flat screwdriver to release the covers in the door pull and handle, then remove the exposed screw. Release the panel clips with a trim tool, lift the panel straight up, and disconnect the switch harness and handle cables.
- Remove the old lock switch
Remove the screw securing the window-switch assembly and release its tabs from the door panel. Press the lock-switch retaining tabs and lift the switch from its bezel without bending the plastic.
- Install the replacement switch
Seat the new lock switch in the bezel until its retaining tabs engage. Reinstall the bezel in the door panel and secure it with its screw.
- Reconnect the panel and test the locks
Reconnect the window-switch harness and door-handle cables, then hang the panel on the door and press its clips into place. Reinstall both trim covers and screws, and test lock and unlock operation before closing the door.
Check your vehicle’s repair manual for exact specifications and fit.