How to Replace Fog Light Assemblies 10-14 Subaru Outback

Difficulty: Beginner · About 45 min · Subaru Outback

Replace a fog light assembly on a 2010–2014 Subaru Outback by lowering the underbody shield, transferring the bulb, and checking lamp operation.

Steps

1. Lower the underbody shield

   Remove the three push retainers securing the shield to the bumper and lower it enough to reach the back of the fog light.

2. Remove the old assembly

   Twist the bulb socket counterclockwise and remove it from the housing. Remove the two lower retainers and two upper 10mm nuts, then push the assembly forward out of the bumper.

3. Install the replacement assembly

   Insert the new fog light from the front and secure it with the two upper nuts and lower retainers. Reinstall the bulb socket and twist it until locked.

4. Secure the shield and test

   Tuck the shield behind the bumper edge and reinstall its three retainers. Turn on the fog lamps and confirm the new assembly illuminates and is seated securely.

Check your vehicle’s repair manual for exact specifications and fit.