How to Replace Side View Mirrors 01-07 Toyota Highlander
Difficulty: Intermediate · About 45 min · Toyota Highlander
Replace a side mirror on a 2001–2007 Toyota Highlander by removing the door panel, disconnecting the mirror harness, and reconnecting its wiring before refitting the trim.
Tools you will need
- 10mm socket and ratchet
- Phillips screwdriver
- Trim panel tool
- Flat blade screwdriver
Parts and supplies
- Side view mirror
Steps
- Remove door panel and switch
Release the window switch, disconnect its harness, and remove the door-pull and sail-panel trim. Remove the exposed screws and clips, lift off the panel, and unplug the courtesy light.
- Remove the old mirror
Peel back the water barrier carefully and free the mirror wire from its tape or retainer. Support the mirror from outside, remove its 10mm fasteners, and lift it from the door.
- Install the replacement mirror
Route the replacement harness through the door and place the mirror against its gasket. Install and tighten the 10mm fasteners securely, then retain the wire clear of the window mechanism.
- Reinstall trim and check mirror
Reconnect the courtesy light and refit the door panel, screws, clips, handle trim, and switch. Reconnect the switch harness and confirm mirror adjustment works in each direction.
Check your vehicle’s repair manual for exact specifications and fit.