How to Replace Wiper Switch 05-11 Honda Civic

Difficulty: Intermediate · About 35 min · Honda Civic

Replace the windshield-wiper switch on a 2005–2011 Honda Civic by removing the steering-column trim and transferring the electrical connector.

Steps

1. Remove the upper trim

   Switch off the ignition and gently pull the upper dash trim away from its retaining clips. Protect the finish and avoid pulling on wiring behind the panel.

2. Open the steering-column cover

   Lower the steering wheel using its adjustment lever. Remove the lower-cover screws and separate the upper and lower trim pieces carefully.

3. Replace the wiper switch

   Unplug the wiper-switch connector by releasing its lock. Remove the switch fasteners, lift the unit from the column, and install the replacement in the same orientation.

4. Reassemble and test

   Reconnect the harness and secure the switch. Rejoin the column covers, reinstall the screws and upper trim, then test each wiper speed and washer function.

Check your vehicle’s repair manual for exact specifications and fit.