How to Remove Front Bumper 09-15 Honda Pilot
Difficulty: Beginner · About 45 min · Honda Pilot
Remove and reinstall the front bumper cover on a 2009–2015 Honda Pilot, disconnecting electrical connectors and restoring the radiator shield retainers.
Tools you will need
- Flat blade screwdriver
- Phillips screwdriver
- 10mm socket
- Ratchet
Steps
Release the radiator shield
Open the hood and pry out the push clips securing the radiator shield. Remove the two 10mm grille fasteners and the Phillips screw at each fender edge.
Remove lower fasteners
Release the push pins beneath the bumper and remove the two lower 10mm bolts. Keep the fasteners organized for reinstallation.
Disconnect and remove the bumper
Pull the bumper corners free from their side retainers and support the cover as it comes forward. Disconnect the electrical harness and lift the bumper away.
Reinstall the bumper cover
Reconnect the electrical plugs and align the bumper with its side and grille mounts. Press the cover into its retainers and reinstall the lower bolts and push pins.
Restore trim and verify
Reinstall the fender screws and radiator shield clips. Check bumper gaps and test any lamps or sensors connected to the harness.
Check your vehicle’s repair manual for exact specifications and fit.