How to Replace Side Mirror 93-99 Volkswagen Jetta
Difficulty: Intermediate · About 50 min · Volkswagen Jetta
Replace the side mirror on a 1993–1999 Volkswagen Jetta by removing the window crank and door trim to access the mirror controller and mounting screws.
Tools you will need
- T10 Torx driver
- Flat blade screwdriver
- Phillips screwdriver
- Trim tool
Parts and supplies
- Compatible side-view mirror
Steps
Remove the door trim
Switch off the ignition and release the window-crank retaining clip. Remove the mirror knob, speaker grille, pull-handle trim, and door-panel screws, then lift the panel away from the lock knob.
Disconnect the mirror control
Remove the triangular foam pad and unplug the mirror controller from its mount. Keep the foam block and grommets for reuse if they remain intact.
Remove and fit the mirror
Remove the mirror mounting screws while supporting the housing outside. Feed the replacement wire and control through the opening, position the foam block, and secure the mirror.
Reassemble the door
Reconnect and mount the mirror controller, then restore the foam pad. Reinstall the door panel, speaker, crank, lock knob, and all trim screws.
Test mirror function
Turn on the ignition and check mirror adjustment in each direction. Confirm the crank and door lock operate and the panel is fully clipped in.
Check your vehicle’s repair manual for exact specifications and fit.