How to Replace Interior Door Handle 2004 GMC Sierra
Difficulty: Beginner · About 45 min · Gmc Sierra
Replace the interior door handle on a 2004 GMC Sierra by removing the door panel, transferring the latch rod and clip, and reconnecting the window switch and courtesy light.
Tools you will need
- Flat blade screwdriver
- 7mm socket
- 10mm socket
- Ratchet
Parts and supplies
- Interior door handle
Steps
Remove the door panel
Release the handle bezel and switch panel, unplug the window switch, and remove the courtesy lamp. Remove the two 7mm panel fasteners and lift the panel away.
Disconnect and remove the old handle
Release the latch rod clip from the handle and remove its 10mm mounting bolt. Slide the handle forward and pull it from the door.
Install the replacement handle
Position the new handle in the door and connect the latch rod. Secure the rod with its retaining clip, then reinstall the 10mm handle bolt.
Reinstall the door panel
Route the wiring through the panel openings and align the panel on its locating tabs. Reinstall the 7mm fasteners, reconnect the switch and courtesy lamp, and refit the trim.
Test the handle and switches
Operate the interior handle and confirm the latch releases. Test the window and lock switches and verify the courtesy light works.
Check your vehicle’s repair manual for exact specifications and fit.