How to Replace Side View Mirrors 03-07 Saturn Ion
Difficulty: Beginner · About 20 min · Saturn Ion
Replace the side mirror on a 2003–2007 Saturn Ion by removing the sail panel and insulation, unplugging the mirror, and securing the replacement with three nuts.
Tools you will need
- Socket Extensions
- Flat Blade Screwdriver
- 10mm Socket
- Ratchet
Parts and supplies
- Side view mirror assembly
Steps
Remove the inner mirror trim
Switch off the ignition and open the door. Carefully pry off the triangular sail panel beside the mirror, then move the insulation aside to expose the mirror connector and mounting nuts.
Disconnect and remove the old mirror
Release the connector tab and unplug the mirror wiring. Support the mirror from outside the door, remove its three 10 mm mounting nuts, and guide the assembly out of the opening.
Install the replacement mirror
Feed the new mirror harness through the door and seat the mirror squarely against the mounting surface. Reinstall the three nuts and tighten them evenly, then reconnect the electrical harness.
Restore insulation and test
Return the insulation to its position and press the sail panel back into its clips. Turn on the ignition and test mirror adjustment, then confirm the trim is flush and the mirror does not move at its base.
Check your vehicle’s repair manual for exact specifications and fit.