How to Replace Tail Lights 10-16 Cadillac SRX

Difficulty: Beginner · About 20 min · Cadillac Srx

Replace the tail lights or bulbs on a 2010-2016 Cadillac SRX.

Steps

1. Remove the tail light

   Pry up and remove the trim button, remove the trim, remove the Phillips screws, pry the tail light out, then press the connector tab to disconnect the wiring harness.

2. Service the bulbs

   Twist the bulb socket counterclockwise out of the light, pull the bulb off the socket, push the new bulb on, then twist the socket clockwise back in — the reverse bulb is an HPC16W and the other bulb is a W21W.

3. Install the tail light

   Insert it into place, tighten its Phillips screws, press the trim onto the tail light, then press the trim clip into the trim.

Check your vehicle’s repair manual for exact specifications and fit.