How to Replace Heater Blower Motor 06-11 Honda Civic
Difficulty: Beginner · About 20 min · Honda Civic
Replace the heater blower motor on a 2006–2011 Honda Civic by lowering the passenger-side trim, disconnecting the motor, and checking all fan speeds after installation.
Tools you will need
- Flat Blade Screwdriver
- T20 Driver
Parts and supplies
- Heater blower motor
Steps
Remove the lower dash trim
Switch off the ignition. From the passenger footwell, release the three lower trim clips and lower the panel enough to remove it from its locating tabs. Set the trim aside where it will not be scratched.
Disconnect and remove the blower motor
Unplug the blower motor connector by releasing its lock. Remove the three T20 screws and lower the motor from the heater housing, keeping the fan wheel clear of surrounding trim and wiring.
Install the replacement motor
Align the motor's locating tab with the heater housing and lift it into place. Reinstall the three T20 screws evenly and reconnect the electrical plug until its lock engages.
Refit trim and test the fan
Return the lower dash trim to its locating tabs and press all three clips into place. Turn on the ignition and test the blower at each speed, listening for rubbing or vibration before reinstalling any remaining trim pieces.
Check your vehicle’s repair manual for exact specifications and fit.