How to Remove Front Bumper 02-06 Nissan Altima
Difficulty: Intermediate · About 45 min · Nissan Altima
Remove and reinstall the front bumper cover on a 2002–2006 Nissan Altima, releasing the splash shield and wheel well fasteners without damaging the clips.
Tools you will need
- 10mm socket
- Ratchet
- Trim tool
- Flat blade screwdriver
- Assistant
Steps
Remove upper and wheel well fasteners
Release the six push clips along the grille. Turn the wheels for access, pull back the splash shield at each headlamp, and remove the fasteners securing the bumper to the fenders.
Release lower splash shield
Remove the 10mm fasteners beneath the bumper and lower the splash shield. Release its remaining push clips and keep the hardware organized.
Remove the bumper cover
With help supporting the cover, release its clips beneath the headlamps and pull the bumper forward. Set it on a protected surface.
Reinstall and align the cover
Lift the cover over the impact foam and engage its clips beneath the headlamps. Reinstall the side and lower fasteners and raise the splash shield.
Secure trim and check fit
Press the splash shield and upper grille clips into place. Inspect the bumper gaps and confirm all retainers are seated.
Check your vehicle’s repair manual for exact specifications and fit.