How to Replace Spark Plugs 09-15 Toyota RAV4
Difficulty: Intermediate · About 30 min · Toyota Rav4
Replace the spark plugs on a 2009-2015 Toyota RAV4.
Tools you will need
- Dielectric grease
- Socket extensions
- 5/8 inch spark plug socket
- 10mm socket
- Ratchet
Parts and supplies
- Spark plugs
Steps
- Remove the spark plugs
Pull the engine cover up and off, disconnect the ignition coil's connector, remove its 10mm bolt, pull it straight up, blow compressed air into the well to clear debris, then remove the plug with a spark plug socket.
- Install the spark plugs
Compare the new plug to the old one for size, insert it into the socket and lower it carefully into the well, tighten it by hand and torque it to about 18 ft-lb, coat the coil's boot with dielectric grease, push the coil down onto the plug, secure it with the 10mm bolt, reconnect its connector, repeat for the remaining plugs, then push the engine cover back onto its mounting pins.
Check your vehicle’s repair manual for exact specifications and fit.