How to Replace Liftgate Switch 10-16 Cadillac SRX
Difficulty: Intermediate · About 35 min · Cadillac Srx
Replace the liftgate switch on a 2010–2016 Cadillac SRX by lowering the liftgate trim, disconnecting the switch, and testing the latch before final assembly.
Tools you will need
- T30 driver
- Pick tool
- Flat blade screwdriver
- Trim panel tool
Parts and supplies
- Liftgate switch
Steps
- Remove the liftgate panel
Release the hatch-pull trim cover and remove its T30 screw. Work around the liftgate panel with a trim tool, pull it down and rearward, and disconnect its electrical plugs.
- Remove the old switch
Unplug the switch connector and press its retaining tabs to release it from the housing. Use a flat blade tool carefully if a tab is difficult to access.
- Install the replacement switch
Align the keyway and press the new switch into its housing and panel. Reconnect the electrical plug and confirm the connector lock engages.
- Test latch and refit trim
Close the liftgate manually to verify the latch operates, then reopen it. Reconnect the panel wiring, engage the trim clips starting near the latch, and reinstall the T30 screw and cover.
Check your vehicle’s repair manual for exact specifications and fit.