How to Install Tow Mirrors 02-08 Dodge Ram 1500
Difficulty: Intermediate · About 90 min · Dodge Ram
Install tow mirrors on a 2002–2008 Dodge Ram 1500 by removing the door panel, routing each mirror harness, and testing mirror adjustment and any powered functions after reassembly.
Tools you will need
- Flat Blade Screwdriver
- T40 Socket
- Phillips Head Screwdriver
- 10mm Socket
- Ratchet
Parts and supplies
- Tow mirror assemblies
Steps
- Remove the door panel
Remove the Torx screw behind the handle and lift the handle away. Take out the panel screws, release the switch panel, unplug its connectors, and lift the door trim from its upper clips.
- Remove the original mirror
Peel back the insulation carefully and disconnect the mirror harness. Remove the three mounting nuts while supporting the mirror, then guide the connector through the door opening.
- Install the tow mirror
Feed the new harness through the door and align the mirror with its mounting holes. Secure it with the three nuts, reconnect the harness, and restore the insulation around the opening.
- Reinstall the panel and test mirror functions
Reconnect the switch wiring, route the harnesses through the panel, and hang the door trim on its upper edge. Reinstall the screws, switch panel, handle, and lock bezel, then test adjustment and any equipped heating or signaling functions.
Check your vehicle’s repair manual for exact specifications and fit.