How to Replace Mirror 99-10 Volkswagen Jetta
Difficulty: Intermediate · About 40 min · Volkswagen Jetta
Replace a side mirror on a 1999–2010 Volkswagen Jetta by removing the door panel and speaker trim, transferring the mirror harness, and testing the switch.
Tools you will need
- T45 Torx socket and ratchet
- T20 Torx driver
- Phillips screwdriver
- Flat blade screwdriver
Parts and supplies
- Side mirror
Steps
- Remove door panel and speaker trim
Release the door-pull and switch panels, then remove the exposed Phillips and T20 fasteners. Lift the door panel away, disconnect its switch plug, unplug the mirror harness, and remove the speaker-panel fastener.
- Remove the old mirror
Move the speaker panel and insulation aside to reach the mirror base. Remove the T45 retaining bolt while supporting the mirror, then guide the wiring through the door.
- Install the replacement mirror
Feed the new harness through the door and seat the mirror on its mount. Install and tighten the T45 bolt, reconnect the mirror plug, and return the speaker insulation and panel.
- Reassemble and verify mirror
Align the door panel clips and press the panel into place. Reinstall its screws and lower fasteners, reconnect the window switch, and test mirror adjustment before refitting the pull trim.
Check your vehicle’s repair manual for exact specifications and fit.