How to Replace Radiator Cooling Fan Assembly 97-98 Ford Mustang

Difficulty: Beginner · About 20 min · Ford Mustang

Replace the radiator cooling fan assembly on a 1997-1998 Ford Mustang.

Steps

1. Remove the old radiator fan

   Remove the coolant tank bracket's 7mm bolt and move the tank aside, disconnect the coolant overflow hose, pull the wiring harness pins out of the fan, disconnect its wiring harness, remove its two 8mm bolts, then pull the fan up and out, rotating it toward the driver's side.

2. Install the new radiator fan

   Set it into place rotating it toward the passenger side, push it into its slots, insert its two 8mm bolts, connect and clip in the wiring harness, push the coolant tank back into place, insert its 7mm bolt, then reconnect the overflow hose.

Check your vehicle’s repair manual for exact specifications and fit.