How to Replace Ignition Coil Pack 03-06 Hyundai Elantra
Difficulty: Intermediate · About 30 min · Hyundai Elantra
Replace the ignition coil pack on a 2003-2006 Hyundai Elantra.
Tools you will need
- 12mm socket
- Socket extensions
- Flat blade screwdriver
- 10mm wrench
- 10mm socket
- Ratchet
- 12mm wrench
Parts and supplies
- Ignition coil pack
Steps
- Remove the engine cover
Remove its four 10mm bolts, then pull the cover off.
- Remove the old coil pack
Disconnect its wiring harness, remove its three 12mm nuts, pry open the wiring harness's wire tie with a flat blade screwdriver, pull the coil pack up and off with the spark plug wires still attached, then move the wire tie onto the harness.
- Install the new coil pack
Transfer the spark plug wires to the matching spots on the new coil pack, set it into place, fasten its three 12mm nuts, connect the wiring harness, then close the wire tie.
- Reinstall the engine cover
Set the cover into place, then install its four 10mm bolts.
Check your vehicle’s repair manual for exact specifications and fit.