How to Replace Tail Light 98-01 Ford Explorer
Difficulty: Beginner · About 20 min · Ford Explorer
Replace a bulb or complete rear lamp assembly on a 1998–2001 Ford Explorer using the fasteners accessible at the taillight edge.
Tools you will need
- Phillips screwdriver
Parts and supplies
- Correct bulb or taillight assembly
Steps
Remove the taillight assembly
Switch off the lights and ignition. Remove the two Phillips screws that secure the taillight, then pull the assembly straight back to release it from the body.
Service the bulb or lamp
Twist the socket from the housing and pull the bulb straight out. Install a matching bulb, or move the sockets into the new assembly, turning each socket until it locks.
Install and verify
Align the housing with its locating points and press it evenly into place. Reinstall the screws and test all rear lighting functions before driving.
Check your vehicle’s repair manual for exact specifications and fit.