How to Replace Ignition Coil 98-11 Lincoln Town Car
Difficulty: Beginner · About 20 min · Lincoln Town Car
Replace an ignition coil on a 1998-2011 Lincoln Town Car.
Tools you will need
- Socket extensions
- 8mm wrench
- 7mm socket
- Ratchet
Parts and supplies
- Ignition coil
Steps
- Disconnect the battery
Use an 8mm wrench to disconnect the negative battery terminal.
- Remove the old ignition coil
Unbolt it with a 7mm socket, ratchet and extension, then unplug its wiring harness.
- Install the new ignition coil
Bolt it down with the 7mm socket, then reconnect the wiring harness.
- Service the remaining coils
Repeat the removal and installation on each remaining coil, then reconnect the negative battery terminal with the 8mm wrench.
Check your vehicle’s repair manual for exact specifications and fit.