How to Replace Coil Packs 03-11 Honda Element
Difficulty: Beginner · About 20 min · Honda Element
Replace an ignition coil on a 2003–2011 Honda Element by removing the coil cover and releasing the electrical connector at the failed cylinder.
Tools you will need
- 10 mm socket and ratchet
Parts and supplies
- Ignition coil compatible with the engine
Steps
Remove the coil cover
Switch off the ignition and allow the engine to cool. Remove the coil-cover fasteners and lift the cover away to expose the ignition coils.
Disconnect the faulty coil
Remove the retaining bolt for the identified coil. Press its connector lock, unplug the harness, and lift the coil straight out of the spark-plug well.
Install the replacement coil
Check the replacement matches the engine and cylinder position. Seat it fully in the plug well, reconnect the harness until it clicks, and reinstall the retaining bolt.
Refit the cover and check operation
Position the coil cover and reinstall its fasteners. Start the engine and check for smooth running and warning lights; diagnose the circuit if a misfire remains.
Check your vehicle’s repair manual for exact specifications and fit.